Monthly Archives:December 2016

  • How To Install Hardwood Flooring

    Installing new hardwood floors is easier than ever thanks to some of the new products now available, and often no longer requires the assistance of a professional carpenter. Pre-finished flooring is now available, saving the homeowner the work of sanding and finishing the floor, because all of this work is done beforehand in the factory.

    A touch of old-style elegance can be added to your home with hardwood floors, and several wood varieties other than the typical red oak can be found in a wide range of textures and colors. Searching the Internet or browsing in your favorite hardware shop to research materials needed to install hardwood floors is an excellent idea.

    Pre-finished flooring can be bought online or from a merchant you trust. After you get the wood home, you should stack the wood in the room it will be installed in for a few days to let it adjust to the normal humidity level. This is important to do because moisture makes wood expand. Leave a half inch between the floor and the wall when installing your flooring. This space could be covered with a baseboard or molding strip later.

    When installing your hardwood floors, there will be step by step instructions from the supplier. If you follow these details, you will get a professional look on your new floor. The wood panels come micro-beveled from the manufacturer to allow for expansion in the summer heat.

    If the flooring in your home is starting to show its age, refinishing it may be an option to look into. Prior to beginning work on the floor, clear the room of everything, even the down to the drapes! To prevent dust from entering the room during the process and marring the finish on the floor, keep the room sealed off. The refinished floor should be ready for use again in about three days, but just to be sure, it’s a good idea to wait an additional day before moving everything back into the room.

    Laminate floors are very easy to install and are very low maintenance. They resist the scratches and stains commonly caused by heavy traffic and the wear and tear from kids and pets. Laminate floors are also manufactured with a tongue and groove interlocking system to make installation quick and easy.

    There are a lot of things to consider when choosing your flooring, but rest assured that manufacturers have come a long way in making their flooring options easier to install. Make sure the instructions that come with your flooring material are clear and make sense, and don’t be afraid to ask questions before you buy.

  • Qualifying For Home Improvement Loans With Bad Credit

    Obtaining Financing to Make Home Improvements

    One of the first things you need to consider with financing for home improvements is how you plan to handle the work. There are three predominant methods for financing: refinance your existing mortgage, apply for an equity loan or obtain an equity line of credit. Which one is best for you? Real-Estate-Yogi.com can provide answers to some questions that can help you answer that question such as:

    1) Do you plan to do the work immediately or stretch it out over time?
    2) Do you need all the money for the contractor up front?
    3) Do you plan to use the money for things other than just home improvements?
    4) What is the total cost of the project?

    All of these factors play into the picture and will provide the best answer concerning financing. If you would like to discuss your needs with a Real-Estate-Yogi.com consultant, fill out the form that appears on the website and someone will contact you right away.

    What about Those Who Have Bad Credit?

    Can you obtain home improvement loans with bad credit? Like any other loan finding a lender for a home improvement loan when you have bad credit is difficult but not impossible. However, since these loans are full-secured by the equity in your home they are probably easier to obtain than other types of loans. In fact, you may even find a favorable interest rate since the lender will be taking minimal risk. Because of the current real estate situation you may need to have a higher percentage of equity in the home than you would have when real estate prices were higher.

    Where to Find Loans for Home Improvements when You Have Bad Credit

    While it may be difficult it is not impossible to find Bad Credit Home Improvement Loans. In fact there are some lenders who don”t care about anything but the equity in the home while others are much more stringent in their credit requirements. The key is conducting the research and choosing the lender that you think is the most likely to have the willingness to help you with the project you have in mind.

    How do you get a home improvement loan? Finding home improvement loans with bad credit is not impossible although it is definitely more challenging. Obtaining financing for home improvements requires a great deal of thought in order to assess the best method for financing your loan. Bad credit home improvement loans are not as difficult to qualify for as unsecured loans although you may have to pay higher interest rates as you would if you had good credit.

  • Make Your Kitchen Floor Clean And Sparkling

    The floor of the kitchen accumulates the dust and dirt faster in comparison of the other rooms floor. So to keep the premises of the kitchen impressive, there is need to clean the floor in a proper mannerBut you cannot deny from the fact that cleaning the floor of the kitchen is not that much easy. There is need of a powerful machine that maintains the beauty of the kitchen floor. Make your kitchen floor sparkling and clean with the help of the cleaning machines. Know about the latest machines and for this take a few steps

    Move away from the conventional techniques Now its time to move away from the techniques that you were using previously. Those techniques remove only dust and dirt from the floor, but with the latest equipment, you can make your floor clean as well as make it hygienic. These machines actually disinfect the floor of the kitchen and clean it deeply. In hotels and restaurants, these machines are now in great demand because of these qualities. It can not only clean the floor, also sanitize and deodorize the floor. One more quality of these machines is that it takes less time.

    Know about few kitchen cleaning equipment The machines on which people are relying more are hard floor cleaners and pressure washers. This machine is perfect for decreasing the surface. This is needed to clean the hard surface made from the stone, tiles and concrete. The high pressure water spray cleans the surface and the floor of the kitchen in an effective manner. The high temperature level at the time of cleaning melts the grease and make it clean. It is also very helpful in cleaning the corners of the kitchen because of the high pressure.

    The other machine that you can consider for cleaning the kitchen is hard floor cleaning machine. This machine is perfect if the area is too large. It is also needed when the area is very dirty. You can use these machines on approximately all types of floors like granite, tile, marble, wood and so many others. But before using these on your floor, confirm it from the seller. There are some well known brands available in the market.

    So its time for you to take the decision and left the old techniques of cleaning the floor of the kitchen. Select the best cleaning machine for you and make your kitchen free from the germs as well as neat and clean. No matters, that you are using these cleaning equipment for the personal use or in the restaurants and hotels.

  • Features of Karmin G3 Salon Pro Black Tourmaline Ceramic Flat Iron

    Utilized for professional and home applications, the new innovative Karmin G3 Salon Pro Black Tourmaline Ceramic Flat Iron comes with a myriad of high-end features such as 100% solid ceramic plate with tourmaline crystals; negative ions and infrared heat for silky, shiny hair; Ion field technology to seal in natural oils, Micro-porous technology that locks in moisture and so on. They are integrated with various other features such as variable temperature settings for all hair types; minimum temperature 80C; tangle-free 3 meter 360 swivel cord; maximum temperature 200C (410F) etc.

    Unlike other flat irons, the Karmin G3 Salon Pro Black Tourmaline Ceramic Flat Iron offers the best result expected without damaging your hair. It can be used to accomplish different hair styles in addition to curling, straightening, flipping etc. The Unparalleled Infrared heat technology of this product offers deep and long lasting straightness. It also boasts of a Micro Chip Temperature Control Infrared Heat and Flash Quick Heating that styles your hair quickly without any hair damages.

    Since they are manufactured with 100% solid ceramic plates that are infused with tourmaline crystals, the flat irons are capable of emitting plenty of far infrared rays and negative ions which help in locking in hair’s natural color and moisture while eliminating frizz. As they are incorporated with ion field and micro-porous technologies, they do not damage your hair like other flat irons.

    The unique features of Karmin Salon Pro iron – such as flash quick heating, a tangle-free swivel cord and temperature settings for all hair types – help to produce silky, shiny, smooth and gorgeous hair effortlessly. You can accomplish different styles like curling and flipping your hair while providing great volume. Moreover, the flat irons are available in 3 distinguishing and enticing shades to choose from.

    Along with all other key features, they offer great durability with its high grade titanium scratch-resistant body. It is capable of operating under high heat and offers uniform distributed heat. Moreover, as compare to other products that offer just 1 year limited warranty, the Karmin G3 Salon Pro Black Tourmaline Ceramic Flat Iron offers three year warranty.

    Author Bio

    Flat Iron Experts, the online shopping site for flat irons, offers wide array of Karmin Flat Irons. We have ceramic flat iron, tourmaline flat iron etc in our collection.

  • Benefits Of Metal Roofing Installation Over Traditional Options

    When homeowners start noticing leaks, missing tiles, and other signs of excessive wear or tear on their roof, they may want to consider metal roofing installation as their next home improvement project. There are many little known benefits of this type of roofing compared to traditional options that make it attractive for all types of properties. Consider these facts when it’s time to repair your roof:

    1) They come with impressive warranties. Some manufacturers give transferable warranties for up to 40 years after metal roofing installation. Workmanship and pricing guarantees are also available in some areas.

    2) The materials come in just about every color and style available. No matter what style your home is, from Cape Cod to Victorian to Contemporary, you’ll be able to find an option that fits perfectly. Colors include traditional dark blues, greens, and black, plus there are a whole variety of other options. Likewise, there are shingles, shakes, panels, and tiles to choose from, just like with traditional materials.

    3) They last for an impressively long amount of time. Industry experts boast that when you choose metal roofing installation it will be the last time you’ll ever have to have the roof on your home replaced. Testing shows that they last a minimum of 125 years, which is especially remarkable when you consider that it’s not uncommon for traditional shingles to need replacement within 10 years.

    4) They can blend in or stand out. One of the things that is so great about this option for your home is that it can make a real statement and add tremendous visual appeal to the property. With all the colors and styles available, it can make your home look completely different than any other in the neighborhood, allowing you and your family to express your individuality in a unique and fun way. However, those who are just looking for solid performance without attracting any attention can choose a more subdued style and color that will blend in effortlessly

    5) They are environmentally friendly. Their high level of energy efficiency has earned them the Energy Star Rating. Furthermore, certain styles are manufactured from as much as 96% recycled material. Green minded homeowners should be sure to check with the seller to ensure they choose a brand that boasts a high percentage of recycled content.

    6) They increase home value. According to some reports, nearly 70% of the cost of metal roofing installation can be added on to a property’s value. It’s also a selling point for potential buyers since they know that they won’t have to worry about replacement any time soon, if ever, during their ownership of the home.

  • Wise Home Improvement Projects Make Houses More Attractive To Buyers

    If youve been putting money away to fix up your house, then now is as good of time as any to undertake the home improvement projects youve been dreaming of. With a little bit of savings, time and patience, you can transform your house into your dream home, but its also important to make sure you think about your style choices before you jump right into things. Chances are good that youll eventually want to resell your house, so its important to make sure you think about the tastes and styles that other people will like because you dont want to go overboard on home renovation projects that could actually decrease the value of your house.

    Whenever you start thinking about fixing up your house, its important to hire a professional to at least go over your plans with you. The professional can help in many ways, but perhaps most importantly, they can give you educated advice about whether or not future buyers would be attracted to the changes you want to make. Some home repair projects are simple and will always increase the value of a house, but if you change things into a wild design, it will be difficult to find a potential buyer that has the same taste as you. With the help of a design professional, youll be able to create informed plans that help you create the house you want without jeopardizing your ability to resell your house.

    Many basic home improvement projects can greatly increase the value of your house, but theyll need to be completed in good taste. For example, putting in wild colored carpet, floors or countertops that dont match would all make many buyers reluctant to consider buying your property in the future. Thats why its so important to use neutral colors that a wide variety of buyers would like and could work with easily. A kitchen renovation tends to be a very safe project you could work on, and one of the best things you can do is replace your old appliances with newer ones. Stainless steel stoves and refrigerators are very popular these days, and putting them in your house may really help sell the deal for buyers. Additionally, these newer appliances are probably much more energy efficient, which will help you keep your electric bills low, and that will be another great selling point in the future.

    When completing home renovation projects, its important to think about how they will affect the resale value of your house, but you also have to recognize that the decision is ultimately yours. If you are comfortable investing in some big changes that may not add value to your house, then its okay to go ahead and make your house as wild as you want it to be. If cost is a factor, however, then youll want to work with at least one professional who can advise you about how to invest in projects that you will get a lot of return out of down the road when you go to sell your house.

  • Principles Of Interior Design

    Scientifically one can break interior design down into a few design principles. But be aware because these are not rules, rather see the principles as fundamental underpinnings for a feeling, flair or intuition to interior design.

    Principle 1: UNITY

    When doing interior design it is necessary to think of the house as a totality; a series of spaces linked together by halls and stairways. It is therefore appropriate that a common style and theme runs throughout. This is not to say that all interior design elements should be the same but they should work together and complement each other to strengthen the whole composition. A way to create this theme or storyline is with the well considered use of color.

    Principle 2: FOCAL POINT

    Interior design’s biggest enemy is boredom. A well-designed room always has, depending on the size of it, one or more focal points. A focal point must be dominant to draw attention and interesting enough to encourage the viewer to look further. A focal point thus must have a lasting impression but must also be an integral part of the decoration linked through scale, style, color or theme.

    Principle 3:BALANCE

    Balance can be described as the equal distribution of visual weight in a room.
    The simplest, and most formal type of balance is symmetrical balance, where the same objects are repeated in the same positions on either side of a vertical axis, such as one would find in old fashioned state or gala rooms.

    Asymmetrical balance is more appropriate in design today. Balance is achieved with some dissimilar objects that have equal visual weight or eye attraction. Asymmetrical balance is more casual and less contrived in feeling, but more difficult to achieve.

    Principle 4: PROPORTION

    Proportion refers to the relative size measured against other elements or against some mental norm or standard. This design principle is of extreme importance when decorating a room.

    Principle 5: RHYTHM

    In musical terms we would describe rhythm as the beat or pulse of the music. In interior design, rhythm is all about visual pattern repetition. Visual rhythm is based on movement. As in music, rhythm in design can also be staccato – abrupt and dynamic or legato – connecting and flowing.

    Principle 6: COLOR

    Color is an element that tends to inspire emotion in people because color has an influence on the value of life above and beyond other considerations. Colors therefore have a definite impact on the atmosphere that you want to create when doing interior design.

    Principle 7: DETAILS

  • Kitchen Sinks and Faucets

    Kitchen sinks and faucets have come a long way since the days of the single rectangle bowl with standard faucets and knobs. Today’s kitchens are not just about function; they are also about beauty and design. Depending on your specific needs and style preferences, there are hundreds of models to choose from.

    Some kitchens are busier than others and require additional sink space for cooking and cleaning. Others don’t see much use and can get by with a much smaller sink area, especially in condos and apartments. Designs cover all needs with sinks that come in single, double or triple bowls, and corner sink units that allow you to save valuable counter space in an already crowded area.

    Sinks today are made from many different materials. Of course, there is the standard stainless steel seen in so many homes due to the fact that is the least expensive option, and it’s durable, resistant to stains, and easy to keep clean. However, on the higher end of the designer scale there are materials such as fireclay, granite and acrylic that add a decorative touch to the kitchen. Acrylic comes in several colors and even comes with an anti-microbial surface that helps to fight damage caused by mold, mildew and bacteria.

    There are many sizes and shapes to choose from as well. Kitchen sinks can be round, oval, square or rectangle and can be configured side-by-side as most are, or in an L or diamond shape, depending on your preference and your space constraints. The most common ways to mount a kitchen sink are either from the bottom up or drop-in. Drop-in sinks are lowered into a pre-cut hole and form a lip around the edges of the counter top. Under mounting a kitchen sink, that is mounting from under the counter, brings the sink top flush with the counter and gives your room a more finished designer look.

    Just as kitchen sinks have come a long way, so have the faucets. Today you can find a huge assortment of faucets that fit every taste and need, including goose neck faucets, pot fillers and even hands-free faucets equipped with infrared technology. Faucets come in a wide assortment of styles ranging from Victorian to contemporary and are made from such metals and alloys as chrome, brass, copper, nickel and gold.

    With so many choices, shopping for a new kitchen sink and faucets to complete your new kitchen look can be quite an enjoyable experience.

  • Custom Motorhome Interior Design

    When it comes to creating a custom interior design for your home on wheels the possibilities are endless! When considering a home remodel or renovation the first step is to talk to a contractor who understands buildings codes and local regulation. Likewise, when you decide its time to give your motorhome or RV a new face, the best option is to contact someone with years of experience in custom RV renovation.

    Time to Renovate:

    Now that youve made the big decision to keep the RV thats taken you on so many great trips and created so many amazing memories, youll need to make a plan of action for remodeling. Three of the biggest components to any remodel are floors, cabinets, and furniture. By updating any or all of these items you will drastically alter the appearance of your RV.

    RVs can be fitted with beautiful wood flooring that will look just as good in your RV as it does in your kitchen at home. For those who prefer tile, thats no problem at all! All types and patterns of tile can be installed whether it be sleek modern look or a floor fit for a king, you decide how grand the appearance.

    Next on the list to be remodeled are cabinets and furniture. Undoubtedly technology has changed substantially over the past few years. This means that there is a good chance that your RV is sporting a TV that isnt quite up to par with todays standards. By remodeling your cabinets you will not only be able to fit a new flat screen TV, but will simultaneously create more cabinet space! There are just as many options for furniture. You can choose to reupholster your existing furniture, or outfit your RV with all brand new seats to match your new floors and cabinets!

    Installation:

    Picking out all of the new materials that you wish to use in renovating your RV is the easy part! Installing floors, cabinets, and furniture will most likely be a lot more work than you will want to tackle by yourself. The best way to ensure that your new custom items are safely and properly secured is to have a professional service complete the work. Those who set out to do the work themselves on a Saturday morning may find themselves a little discouraged at how daunting the work load can be. If you want something done right, have a professional do it! You have come too far to cut corners now, so make sure to have your new custom interior completed by a qualified professional.

  • Tips On Tenant Improvement Allowances

    Tenant improvement allowances, funds provided by the landlord to improve office space, are becoming increasingly prevalent during landlord-tenant negotiations, and all companies should consider their role in creating an ideal office space. However, companies seeking to lease at least 5,000 square feet of Class A & B office space with a lease term of at least five years can exercise much greater leverage on the landlord and will typically find it easier to achieve many of the suggestions below. If in doubt, you should consult with a real estate broker to determine the feasibility of any specific item.

    1. In todays economic environment, many landlords are providing and funding 100 percent of the building standard installations required by tenants.

    2. Tenants should try to negotiate above-standard items, such as millwork, extra HVAC, large glass walls, plush carpeting or special lighting, to get them included in the tenant improvement allowance provided by the landlord.

    3. When landlords refuse to fund all or a portion of above-standard items, tenants can try to amortize their cost into the rent over the term of the lease instead of paying out of pocket.

    4. Funding above-standard work can also be achieved via negotiating tactics, for example, offering to decrease the quantity of free rent and increase the tenant improvement allowance instead.

    5. We recommend tenants hire an architect to represent their interests and suggest a layout and design of the space to ensure tenant improvement allowances are put to the best possible use.

    6. Tenants can avoid the need for a large tenant improvement allowance by touring many suites and finding one with a suitable existing configuration. However, we advise tenants to avoid compromising the amount of their tenant improvement allowance just to decrease the rental rate.

    7. Landlords are providing generous tenant improvement allowances for new tenants, and tenants can use this as leverage even if they are only renewing, especially if they have occupied the space for the past five-to-ten years.

    8. If landlords offer a specific dollar amount for a tenant improvement allowance, we advise tenants to negotiate an open-bid format, based on an expert review by their own architect, project manager or construction firm.

    9. Many companies are using tenant improvement allowances to create more light in the workplace by adding glass in offices and conference rooms. From narrow, vertical side-windows to full walls of glass, natural light illuminates interior areas and provides sight-lines for workers to improve communications and productivity.

    10. We always recommend tenants hire an architect to brainstorm about the best uses for tenant improvement allowances. Many companies are decreasing hard-walled offices in favor of flexible workstations and huddle rooms, small two-to-four person conference areas, to accommodate departments changing needs.