It’s always good to have a fire for warmth when winter rolls around. The newest pattern among new homeowners is having one outside, but it’s too costly to have someone else make it for you. DIY outside fireplaces are such an easy project that it may be performed by anybody willing to dig in and do the work. There are two ways to do this: build one from scratch or purchase a backyard Fireplace kit. Either approach, you’ll at the very least must get cement, stones, decorative tiles, and a fireplace screen to make one yourself.
1. Placement and Laws
Choose a spot that is far enough away your house and anything that may catch on fire easily. You also have to verify your local legal guidelines concerning home improvement to see when you not only can, but should you need a building permit to do such a thing.
2. Choosing the Right Fireplace
The easiest method to make one is to purchase an outdoor fireplace kit. These don’t come with all the material that you’ll need, however it should save you time and energy. Nonetheless, you can also find plans to make one from scratch for those who choose.
3. Build a Foundation
After choosing the right spot, clear away whatever debris is there and create a foundation utilizing concrete, cinder blocks, or whatever you want to use on your DIY outside fireplace.
4. Putting in Your Fireplace
No matter whether you’re following plans to make your own or the directions from the kit, begin assembling your fireplace. The difference between this and one for inside your house is the lack of a damper. It’s best to build the chimney as high as you possibly can and the opening a bit lower to prevent wind from swooping down. That can both make it troublesome to begin a fire and even blow sizzling embers out of the fireplace.
5. Try It Out
Before making it look nice, start a fire inside to make sure every little thing is to your liking. This may help you decide if you want to make the fire place taller or fix the inside of the chimney to let the smoke out from the top.
6. Enhance your Fireplace
This is the place the work stops and the fun begins. After finishing your DIY outside Fireplace, embellish it to your specification and/or let the paint dry (should you chose to use some).
That is all you have to do to make your individual outdoor fireplace. You may purchase plans and outside fireplace kits at your local home improvement store and online as well. The kits cost approximately $1,000 and the plans to make your own can be found online from free to around $30. Creating your own fireplace outside will not only put a smile on your face and your loved ones’s, but it also provides you a cause to spend extra time outside. Even if you don’t have a fire going
A bar is no longer a place where people simply go to have a shot of drink. A bar, independently situated or part of a nightclub, has definitely acquired prominence in the modern age as a location where people go for letting their hair down, get pleasure from a relaxing drink or socialize with other people. The design and atmosphere of a bar has therefore become an area of focus for all bar/club proprietors and they are investing more in bar interior design implementations.
Why is bar interior design so essential
Every single smart bar owner knows that to pull in clients in volumes, he should offer them a unique bar environment. In other words a bar interior design, he understands, can easily make or break his idea of doing prosperous business. Even before a client orders for a drink, an impression of the place is formed in his mind. The decor have to therefore be visually inspiring, evocative and refined. An environment which is intelligently and sleekly designed and at the same time lovely and well-laid out, is the best design for nightclubs or bars. Striking and useful these are the two key phrases that have to be remembered once creating the interior of the bar.
A bar advisor or a good interior designer is the very best person to help you in this and one can seek advice from both of them if want to invest the place with the right extent of style and practicality.
Bar interior design and lighting
No bar interior design can be complete with no appropriate lighting solutions. If you want your bar to introduce a special atmosphere then you simply cant settle for normal lighting fixtures and controls. Actually, the kind of lighting that you choose accounts for the mood that prevails in the bar and for the quantity of profits that you get. You definitely need to have something special there and LED lights fit the bill very well in this respect.
LED lights are not only glamorous and energetic, they are also cost-efficient, energy efficient, easy-to-install and extremely long lasting. You can mount LED lighting
Under bar stools
For liquor bottle display
For below counter lighting
At the rear of the giant lcd screen TV in the bar
In alcoves and nooks for that special mood enhancing urban glow
Pep up the bar interior design with special designs and concepts and watch the changes that it ushers through!
When I thought of purchasing a flat iron for the first time, I was rather confused in choosing the best flat iron for my hair. As I needed a slim flat iron that could offer comfortable handling and easy styling, I bought the Isinis Silm Ceramic Flat Iron that could allow me to carry it in my handbag whenever I had traveling needs. Isinis Silm Ceramic Flat Iron is one of the most popular and highly rated slim flat irons available today that is known for the compact, slim and lightweight design that offered the option of being carried in the bag comfortably. This way, we need not have to worry of keeping our hair in the best condition even when we are away from our home. The most amazing quality of these travel flat iron is that it comes with a universal voltage features (AC 110-230V) that enables it to be used anywhere in the world by setting the voltage that suits the voltage requirement for that country.
Isinis Silm Ceramic Flat Iron is made with the advanced ceramic heating plates that have the capability of generating negative ions that safeguards the hair from heat damage. The most amazing features of my Isinis Silm Ceramic Flat Iron is that it surpass in durability and heating time from its competitors and offer so many safety features that can protect the hair from a number of hair issues. Along with the capability of liberating lots of negative ions for enabling heat protection, Isinis offer even heat distribution for safe and efficient application. The ultra slim plates of the Isinis Silm Ceramic Flat Iron is just 5/8 wide and can be used in easily to accomplish different hair styles such as for straightening, curling, creating waves, crimping etc. The instant heating feature of the Isinis Silm Ceramic Flat Iron can heat up to 410F.
Isinis Silm Ceramic Flat Iron offers healthy and clean hair and scalp by preventing the growth of bacteria and fungi on your scalp. They also eliminate frizz and damaging hot spot that often happen with other flat irons during styling.
It is often said that buying a home is likely one of the most important purchases you will ever make. However unlike most purchases, there is no return policy or money-back guarantee. Once you buy a home, it is yours to maintain, repair and of course, pay the bills. This is why it is critical to know as much as you can about any problems or warning signs your potential home could have, before making the commitment to purchase it.
A home inspection by a professional home inspector is probably the best way to assess the condition of a home. However like any service provider, you want to make sure you are getting an honest, professional and unbiased assessment of the home you are interested in. Doing a bit of homework up front will help ensure that the inspector you hire is not only worth the money you pay him or her, but most importantly, that you will get the proper information you need to make that big investment decision.
One of the most common questions people have about home inspections is what will the inspector inspect and is it worth it. To answer the last question, you probably need the perspective of the first part. The following is a list of some of areas a good home inspector will cover:
* Structural system – including foundation, framing, crawl spaces, floor, wall, ceiling and attic structure.
* Exterior – includes exterior wall covering, flashing, trim, exterior doors, decks, porches, steps, eaves troughs, soffits, facials, grading, surface damage, retaining walls, walkways, patios and driveways.
* Roof System – Includes the roof covering, drainage systems, flashings, skylights, chimneys and roof penetrations
* Plumbing System – Includes interior water supply, fixtures, faucets, drain, waste, vent system, water heating, fuel storage/distribution, drainage sumps, sump pumps and related piping.
* Electrical System – Includes service drop, service entrance conductors, cables, raceways, service equipment, main disconnects, service grounding, service panels, sub panels, conductors, overcurrent protection devices, lighting, fixtures, switches, receptacles and the ground fault circuit interrupters.
* Heating System – includes the installed heating equipment, the vent system, flues and chimneys.
* Air Conditioning Systems – Includes installed central and through-wall cooling equipment
* Interior – includes walls, ceilings, floors, steps, stairways, railings, countertops, cabinets, doors, windows, garage doors and garage door operators.
* Insulations and Ventilation – includes insulation and vapour retarders in unfinished spaces, ventilation of attics, ventilation of foundation areas and mechanical ventilation systems
* Fireplaces and Solid Fuel Burning Appliances – Inspect the system components, vent systems, flues and chimneys
Unless you know these systems well, it is highly recommended that you do get the services of a qualified professional home inspector. A good inspector is worth every penny and can save you thousands of dollars and plenty of hardship, with a small investment in their work upfront.
Lights play an important role in your home. They create an ambience and can add drama and create moods to an otherwise normal plain environment. The home automation system makes it possible for intelligent lighting controls to go that extra mile to blend in with your lifestyle. Intelligent lighting goes beyond wireless home lighting controls using your Smartphone. It requires other household devices, including motion sensors, light sensors, timers and dimmer switches, to work in sync with your home lighting control.
Below are some common scenarios of how intelligent lighting provides homeowners more than just the facility to remotely switch on and off their lights using their Smartphones.
Improve Safety & Security
Smart lighting can give the impression that your home is occupied even if you are away at work or enjoying your holidays. This is possible by scheduling your outdoor or living room lights to switch on as soon as the motion detectors sense movement. So, whenever a movement is detected around your home, the lights will come on and simulate your presence as if somebody is at home. This is how automated lighting can help add to your remote home monitoring system.
Intelligent home lighting control can reduce your energy usage considerably. As well as allowing you to remotely control all types of lights using your Smartphone app, you can schedule them to switch on or dim at certain times of the day using timers and dimmers. You can also sync the photo sensors and lights to work in tandem so that the lights come on whenever sensors detect low light. This ensures none of the lights are inadvertently left on and that the electricity is optimally used thereby reducing your utility bills.
Return to a Well-Lit Home
Another scenario where intelligent lighting helps is when we return home from work. All of us like to enter a well-lit home after a hard days work. You can schedule your living room lights to turn on as soon as the magnetic door sensor is activated when the front door is opened. This means you will no longer have to unlock your main door and hunt for the light switch panel.
Intelligent lighting control helps you to create the ambience you desire by illuminating or dimming a collection of lights. For instance, with a single tap on your phone you can switch all the indoor lights off and dim all the garden lights for a perfect campfire evening with your friends. You can also dim and change the colour of your living room LEDs to have a faint blue hue to enjoy an evening watching movie with friends.
If you’ve been planning a siding replacement project in Texas, then you might have noticed that more and more homeowners are choosing Hardiplank, particularly in Houston. If you have yet to hear about Hardiplank, then you may be wondering why its become such a popular option for siding material.
Hardiplank is a brand of fiber cement siding manufactured by James Hardie Building Products. It’s composed of a combination of cement-like materials and wooden fibers. As a form of siding material, Hardiplank is used in Houston for a number of reasons, the most common of which, is its look. Although Hardiplank is classified as fiber cement, it’s barely discernible from actual wood. It’s also less expensive in comparison, which allows Houston homes to have an elegant exterior for a more affordable price.
Using Hardiplank for Houston homes can also be more beneficial when compared to other siding materials. For example, even though it looks like wood, Hardiplank is water, bug and impact resistant. It doesn’t have any of the problems that wood usually has like termites, rot, and a tendency to splinter.You may also come across vinyl as another option to Hardiplankin Houston. This is because vinyl is cheaper as a material, and easier to install, hence lower labor cost. However, the problem with using vinyl siding is that although it’s more affordable, it doesn’t respond well to heat. Unless it’s treated properly, vinyl siding can warp or melt. Moreover, it can also release toxic fumes that are dangerous to both you and the environment.
Another once common option for siding material that’s been replaced by Hardiplank in Houston is Masonite. This brand of hardboard siding can still be found in a number of homes and buildings. However, it’s lost its popularity over the years since people have learned the hard way that it doesn’t hold up well against wind and rain. Masonite has a tendency to soak up water if it’s not sealed or maintained properly.
With Hardiplank however, Houston homeowners only have to do minimal maintenance. Residents using Hardiplank in Houston also dont have to worry about the hot, humid weather doing any damage to their siding. Since Hardiplank is made of fiber cement, it wont absorb moisture and its fire resistant.
This leads to one of the best perks that comes with using Hardiplank in Houston homes: the warranty. Homeowners love using Hardiplank for their Houston homes because aside from its benefits as a material, it has a 50-year transferable product warranty. It allows residents to stop worrying about how theyre going to replace their siding in the event that it does get damaged.
NP Group is one of the major hair care brands providing in a wide range of advanced hair straighteners to choose from. NP flat irons are your just right choice for creating trendy hairstyles with salon quality results at home.
The latest creation from NP Group, the NP Nano-Silver Technology Ceramic Flat Iron is an upgrade version of the popular YESIS 302 Ceramic Flat Iron. It is equipped with top quality Korean Far Infrared Ceramic Heater to heat up to maximum temperature in less than 30 seconds. The product eliminates frizz and close the cuticle to create smooth and shiny hair. During styling, it causes less damage to the hair cuticle. Further, a great thing about this styling tool is that it does not harm hair like other flat irons.
NP Nano-Silver Technology Ceramic Flat Iron is a very versatile and durable hair styling iron coming with an ergonomic design to flip, straighten and curl hair with a twist of wrist. Its Tourmaline / Ceramic Technology preserves more moisture within the hair shaft. It distributes heat across the entire surface evenly and retains heat more efficiently. It also eliminates damaging hot spots and preserves more moisture within the hair shaft. The Far Infrared (FIR) rays penetrate deep into the hair shaft thus dries the hair from the inside out. Negative ion technology and multiple temperature setting are other features of the device. It closes the hair cuticle that is very good for the health and appearance of the hair.
As it features the New Nano-Silver Technology, it works to get rid of bacteria from appliances to help a germ free zone to protect the safety and health of stylists and clients. To prevent tangling, it is equipped with professional 360 swivel cord. The device causes less damage to the hair cuticle during styling.
Professional 360 swivel cord, multiple temperature settings and an On/Off switch are other notable features of the instrument. The product comes with one year limited warranty.
Gutters are anything but glamorous, but they do serve a valuable purpose: managing rainwater and moisture, and routing it from your roof and away from your house. With a quality gutter system, a house will remain dry, and its siding, doors, windows, and foundation will be thoroughly protected from water damage. Granted, some roofs with broad overhangs do not require gutters, but most roofs do. What home improvement superstores dont want you to know is that their vinyl or plastic gutters they advertise as Easily installed by anyone systems usually are inadequate as far as flow and rain capacity goes. They also must be installed with the correct pitch or you will experience poor drainage, blockage and erosion of the ground below the gutters.
Before You Buy Your Gutter System
Talk with your neighbors and friends to find out whether they are happy with their current gutters and whether they can recommend a specific type of gutter system. Before investing in gutters, you will want to consider the pros and cons of the various gutters on the market today:
Wood Gutters: Once the most popular gutter systems, wood gutters are now fairly rare, except in restoration work. Depending on the wood type, wood gutters can also be very expensive, running anywhere from $12 to $20 per linear foot.
Aluminum Gutters: The most common gutters on the market, aluminum gutters hold much more water than wood gutters, although they tend to lose their shape when a ladder is pressed against them. When buying aluminum gutters, be sure to choose the thickest aluminum available. Keep in mind that primary aluminum is usually thicker and more consistent than secondary (recycled) aluminum.
Vinyl and Plastic Gutters: You must install these yourself and can be fairly inexpensive. Vinyl and plastic gutters do not rust or rot. One disadvantage, however, is that they can become brittle over time or during harsh winters. Additionally, they usually will leak at the seams over time without constant maintenance. With couplings, hangers, brackets, and downspouts, on average vinyl or plastic gutters will run you about $3 to $5 per linear foot. Sometimes this price is in line with a commercial provider without the hassle of doing it yourself.
Installing Vinyl Gutters
The following are step-by-step instructions for do-it-yourself vinyl rain gutter installation.
c) tape measure
e) power drill with screwdriver bits
f) fine-toothed hacksaw
g) galvanized screws
h) vinyl gutters, hangers, elbows, connectors, downspouts, drop outlets, corners
To catch run-off water, gutters need to be installed so that the edge of the roof falls over the middle of the gutter. In this position, the gutter will catch any water that flows off the roof. Your gutters should also gently slope from end to end so that rainwater will flow to the downspout and away from your home. If possible, you will want to position the gutter so that the water flows to a hard surface that is already sloped, such as a driveway. After determining the design of your gutters, measure your roof to determine how many gutter pieces you will need. Vinyl gutters usually come in 10-foot sections.
Next, measure one-half inch from the end of the gutter, away from the downspout and mark the spot with chalk. One-half inch from the downspout location, place another chalk mark; making sure this mark is level with the first one. Snap a chalk line between the two marks. Place your ladder against the house and install the gutter-system components, including drop outlets and corners, from there. Check your manufacturers instructions to determine how far apart you will space your mounting brackets or hangers. (Usually this will be between 24 and 30 inches. Make sure that you align all components with the chalk line you made earlier as your reference line.
Snap the gutter sections into the hangers or brackets and join the sections with your connectors. With the hacksaw, cut any sections you need to finish the run into the lengths you need. At the bottom of the drop outlet, install the elbows, then cut and install the downspout sections to the drop outlet base and fasten it the drop outlet base to house. Install another short section of downspout to direct the flow away from the foundation of your house.
Before consider doing the work yourself, call a professional regarding installing your gutter system. Installing vinyl gutters may not be as easy as you might think but it may save you a few hundred dollars although your labor is not included.
Wood tiles are ceramic or porcelain tiles. They are made to look as much as a real hardwood floor. They are particularly noted for different taste and stunning room decoration. So these tiles are highly appreciated for the same. People choose them for their wood-like look that leaves an impression of living in the wilderness – they are so real. Interceramic colonial Wood Series can help you out in finding the most desired and lovable tile collections to decorate your room with a rustic setting.
Implying a wood-flooring idea is great that requires you the nature like, real and beautiful wood-floor. Today’s technologies are so advanced that they can present perfect look as real hardwood along with some more advantages. These wood grain tile have the very same textures as those of real woods. Once, I experienced about a family who did not use tiles for their floor. But having various problems with real wood-floor, they decided to change their decision.
To fulfill your requirements wood-looking tiles are offered with some variety of color in some different species. Choosing the way of making the floor the most beautiful looking sometimes appears as a challenge depending on its distinctive characteristics. To make you feel comfort and help you decide comes the Interceramic Colonial Series.
Some unique patterns are available in this series and they look as real as Maple, Cherry, Oak, Chestnut and Sherwood colors. This Interceramic Colonial Wood Series assures of durability, slip-resistance as well as frost-resistance. The 6″ x 24″ size plank will give you a feeling of natural and real hardwood.
While purchasing wood-furniture you need to make sure that your furniture in the room match with your wood-floor. You can either select the wood-furniture according to the wood-floor to have a match or also place a contrast between the furniture and floor. AS for example, you can choose light colored wood-floor with dark cherry, mahogany or oak furniture for the contrast. In case of choosing some dark or light colored you have to make a nice combination between colors. Interceramic Colonial Wood Series helps you get your desired color, variety and real wood-look tiles.
From a queer variety you get the ample scope to get real tile that looks like wood. You need to find a genuine expert having the answering ability to any query regarding tile that looks like wood. It is 100% possible for the Interceramic Colonial Wood Series to make you 100% satisfied and contented with its grandeur.
Building developers understand the importance of a well-decorated showroom; indeed, showroom interior design is the most important facet when it comes to securing sales for new housing developments. Consequently, interior design must be fundamental to the priorities of all property developers who want to be successful within the housing market.
However, property development is a time-consuming, complicated process; property developers frequently find it difficult to set aside time to perfect the interior design of their showrooms. More often than not, the interior design requirements of a showroom property must be subcontracted to specialist companies.
Successful showrooms take time to develop and need the professional expertise of an organisation that understands the difficulty of the task. Interior design is an artistic process the goal of which is to capture attention and imbue potential buyers with the imagination to conceive of a lifestyle choice that pertains to the development being viewed this is the aim of the showroom, to make potential buyers feel that they belong to the concept elicited by the home. Showroom interior design has a proven track record in maximising sales appeal, and thus can make-or-break a developers dreams.
Comprehensive interior design processes will include consultations between developers and designers in order to capture the essence of the lifestyle that is being designed. Budgets vary, but at very little cost, interior design can return huge revenues. Enhancing the saleability of the property beyond, even, the imagination of the developer a well-presented showroom can maximise sale potential well beyond projected figures. Presentation really is the key to selling property, regardless of whether this is a single property or a whole complex.
A comprehensive showroom design will consist of delivery of all furnishings, as well as their arrangement in a way that is aesthetically pleasing. Finishing touches and embellishments must be thoroughly thought out and planned using a professional interior designer, who understands the market and has a proven record, is essential for any developer wishing to flourish within the property market. Designers must be current and understand the intricacies of current interior trends in order to ensure that they undertake a project where the results will speak for themselves.
Emblem Furniture is one such designer, offering comprehensive showroom interior design packages intended to increase sales potential. Not only are all furnishings provided, the showrooms are fully designed and assembled using concept designs. Working closely with developers to ensure that their visions come to light in the most stylish and fashionable creations imaginable, Emblem Furniture can create scenes that once seen, are never forgotten, all showrooms are designed according to market requirements and in reference to consultation with developers. Creating designs that reflect both current trends, and the wishes of the developer.